Help Our Cause

• Fail Safe - Gives immediate positive shut-off in the event of cold water failure.
• Automatically mixes steam and water proportionally, heating it to a selected temperature.
• Provides a ready supply of hot water when and where it is needed.
• Eliminates the need for hot water storage.
• Broad application versatility.
• Wide Range of operating parameters.  (20 psi - 150 psi steam & 20 psi - 150 psi water). 
• Quiet and economical operation.
• Four sizes to suit requirements (1/2", 3/4", 1" and 1 1/2").

When the outlet control is opened, cold water flows into the valve body. This change in differential pressure raises the valve's piston, lifting the steam valve from its seat. Steam combines with the cold water in a mixing chamber to create instantaneous hot water. Once the control is turned off, a spring, reinforced with static water pressure closes the valve. This shuts the steam off completely. So, in the absence of cold water, steam cannot escape through the outlet. This fail-safe principle is the heart of the Dynafluid design and is the key to its worldwide success.

When the outlet control is opened, cold water flows into the valve body. This change in differential pressure raises the valve's piston, lifting the steam valve from its seat. Steam combines with the cold water in a mixing chamber to create instantaneous hot water. Once the control is turned off, a spring, reinforced with static water pressure closes the valve. This shuts the steam off completely. So, in the absence of cold water, steam cannot escape through the outlet. This fail-safe principle is the heart of the Dynafluid design and is the key to its worldwide success.

Dynafluid 2000 steam and water valves are the preferred choice for a vast array of industries throughout the world. You'll find them in abattoirs, breweries, chemical and pharmaceutical plants, dairies, food production and processing plants, launderettes - the list is endless! Whether your requirement is hot water for wash down systems, jacketed vessels, back-flushing filters, vehicle washing or in process heating, you'll find a total Dynafluid solution to fit your needs.

• Outstanding economy - up to 80% cost-savings.
• Instantaneous hot water.
• Unrivalled operator safety - steam shuts off automatically if cold water pressure is less than 15 psi.
• Easy to service without removing from pipe work - full spares availability
• Available in four sizes from ½” to 1½” for flow rates up to 90 gpm.
• Simple installation - no gas or electrical connections required.
• Variety of finishes, natural bronze, chrome plated, Teflon coated (for hard water applications), electroless-nickel plated and stainless steel (3/4" size only) for hygienic applications.
• Unique, proven over 40 years' international experience.